CVS575 voltage controlled saw oscillator 3.3v lvpecl 5x7.5mm smd rev.: d date: 06-11-07 model CVS575 is a saw(surface acoustic wave) based voltage controlled oscillator (vcso) designed for high performance plls. it is an ideal choice for telecommunication applications needing to meet low jitter generation requirements. it is housed in the industry standard 5x7.5x2.5mm smd package. the enable/disable function was designed to be used with cmos logic levels for ease of interfacing. it is not necessary to convert to lvpecl logic to turn the ouput on and off.
CVS575 voltage controlled saw oscillator 3.3v lvpecl 5x7.5mm smd rev.: d date: 06-11-07 performance specifcation min. typ. max units nominal frequency: customer specifed 315 1000 mhz absolute pulling range 50 ppm frequency stability 150 ppm linearity 15 % tuning sensitivity, kv +275 ppm/v output phase noise @1khz offset -100 dbc/hz @10khz offset -125 dbc/hz @100khz offset -138 dbc/hz @1mhz offset -140 dbc/hz @10mhz offset -142 dbc/hz jitter sonet oc-48 (12khz-20mhz) sonet oc-192 (50khz-80mhz) 0.18 0.12 ps,rms ps,rms rise/fall times, tr/tf 20-80% 100 240 ps output high voltage, v oh 2.215 2.420 v output low voltage, v ol 1.470 1.745 v enable high voltage, v ih 2.0 vcc v disable low voltage, v il gnd 0.8 v enable high current, i ih +150 ua enable low current, i il -150 ua duty cycle 45 50 55 % supply voltage 3.0 3.3 3.6 v supply current, icc 82 ma control voltage 0 3.3 v input impedance 100 kohm input modulation 500 khz operating temp. -20 +70 c storage temp. -45 +90 c parameter conditions mechanical shock mil-std-883, method 2002 mechanical vibration mil-std-883, method 2007 solderability mil-std-883, method 1014 resistance to solvents mil-std-883, method 2016 pad connection 1 volt. cntrl. 2 e/d 3 gnd 4 out 5 cout 6 vdd
|
